The EDM drill machine is used for wire hole of WEDM, holes for spurting silk, holes in filter plate and sieve-plate, the dissipate heat holes in motor¡¯s blade and crock, the holes in hydraulic circuit. The machine is also used to erode the drilling head or the awl which is broken in the workpiece, while the whorl of the hole is loss-free....

The EDM drill machine is used for wire hole of WEDM, holes for spurting silk, holes in filter plate and sieve-plate, the dissipate heat holes in motor¡¯s blade and crock, the holes in hydraulic circuit. The machine is also used to erode the drilling head or the awl which is broken in the workpiece, while the whorl of the hole is loss-free....

The EDM drill machine is used for wire hole of WEDM, holes for spurting silk, holes in filter plate and sieve-plate, the dissipate heat holes in motor¡¯s blade and crock, the holes in hydraulic circuit. The machine is also used to erode the drilling head or the awl which is broken in the workpiece, while the whorl of the hole is loss-free....

This machine is suitable to drill holes in various conductive and semi - conductive material such as stainless steel, chilled steel, solid carbide, copper, aluminium, etc. The hole size is consistent throughout the length in the special semi-immersed drilling method. Holes from diameter 0.3mm to 3mm with maximum depth to diameter ratio of 300:1 can be drilled. The machine is suitable for drilling wire-cut start holes, filter holes, jet holes, group holes and holes of super depth etc,. The drilling can be done on oblique and curved surfaces directly. The machine can be used to erode the drill / tap , etc which are broken in the work piece without destroying the screw thread of the holes....