Product information

 

Control system features:

The controller includes a calculator, pulse power supply, drive power supply, machine electric (only intelligent type).

 

High frequency power supply:

1. All-digital control, parameter selection accurate and intuitive, easy to operate; use dedicated IGBT power modules, large output power, and little molybdenum wire loss; 

2. Pulse width 4-96μs, interval 3-15 adjustable, figure shows the parameters, automatic memory; 

3. Sub-storage empirical parameters, select according to material and thickness; 

4. Specially designed waveform adaptive, processing current gradient increase and parameters adjust related output function; 

5. Unique specular material edge alignment function; 

6. System uses entire plate modular design, with fault indication function; 

7. With high-quality power devices and imported large capacitor filter capacitor to ensure stable operation of power for long time.

 

CNC software package features:

The control system uses a specially designed digital control hardware card, the controller system software all-English prompts, equipped with computer numerical control, hardware add-in card with interface circuit, variable-frequency and high-frequency control switch with characteristics of fewer components, less connector , high reliability.

1. Boot operation simplify: System parameter setting can be permanent, easy to learn; 

2. Permanent retention of memory data: The system can be automatically attached to the nickel rechargeable batteries for the following memory requirements for power status, and improve the power-off protection function, such as a sudden power-off process, after the resumption of electricity to continue processing; 

3. A variety of input methods: A): keyboard 3B input B): AUTOP graphics programming C): HL conversational programming D): floppy disk program input E): Client Programming System communications input F): Customer network system data exchange input; 

4. Graphic display processing process, and display numerical changes of the relative coordinates X, Y, J and absolute coordinates X, Y, U, V, etc.; 

5. Processing parameters including: 3B compensation, processing ratio, coordinate transformation, recycling processing and step speed adjustment and so on, have 8 kinds of coordinate transformation, like rotating, mirror, etc.; 

6. Machining automatically accumulated working hours to facilitate the management of the use of machine tools; 

7. Taper machining applications of the four-axis / five-axis linkage technology, special-shaped and simple upper and lower input taper angle of the two processing methods, so that taper processing becomes faster, easier; 

8. Guide pulley cut-point compensation, including the U axis and V-axis, so that big taper cutting accuracy is much better than similar software; 

9. Calibration precise calculation of base-level and away from the wire frame, ensure taper machining accuracy, and it’s easy to operate; 

10. AUTOCAD can be DXF format and the ISO G format for data conversion;

11. Processing instructions for a particular group (selected at random interval) to set the cycle of processing 2 ~ 255 times; 

12. The starting process paragraph is arbitrary, and end to any paragraph, as well as the positive / reverse processing; 

13. Analog processing procedures can quickly check the results of the end coordinates, and to pre-screen process; 

14. May at any time set (or cancel) processing suspended sign when finish the process paragraph;

15. Suspended, end, short-circuit automatic rollback and short-circuit a long time (1 minute) alarm; 

16. Interpolation processing operation to 2000 meters radius; 

17. Medium Automatic.

previous:Wire Erosion
next:Medium Speed WEDM Control System